We supply, undertake commissioning and test Diesel Generators from 5 to 2000KVA    with full stations, synchronizing system & load management with complete Fuel tank system; high quality canopy with the best handling of exhaust piping using Silicate. Epoxy painting on the iron pipes using the matching colors of the unit enhances its aesthetic value.

Generators should always be installed, serviced and repaired by the authorized and certified technicians who have a thorough knowledge and they should always comply with standard operating procedures while doing so.

While all diesel generator sets have some basic requirements, each brand and model has unique installation requirement. Baghdad Al Salam service team covers all aspects of installing the generators viz:

Choosing the perfect location

While determining a suitable location for your generator set there are many aspects you have to take into consideration. Access, space for maintenance, noise, ventilation, exhaust piping, fuel piping, humidity, and temperature are some of the factors that must be considered. A location where temperature conditions are controlled and isolated from main working area is preferred. A tail water gallery location is frequently used for a generator set.

Level of ground

Generator should be placed on a level surface, which is non-combustible and non-conducting and a little above the ground level to prevent its contact from rising water levels.

Electrical connections (wiring)

Wiring of the transfer switch, 120,240V circuit breaker:

To connect a standby generator to your existing electrical system, you’ll need a separate device called an Automatic Transfer Switch. The transfer switch is an essential safety system that prevents your generator from feeding electricity back to the local power grid.

Do not attempt to install a transfer switch yourself. Installation of transfer switches always requires a professional electrician. The model of transfer switch will depend mainly on the size of your generator. In very high-priority situations such as hospitals, higher-end transfer switches can be worth the extra cost.

In addition to the generator and transfer switch, you may want to invest on a dedicated electrical sub-panel, as well. Only your essential equipment is connected to the sub-panel, which is connected to the generator. That way, when power fails, your critical devices will get the emergency power without the risk of overworking your generator or turning off or unplugging other equipment.

Connecting the fuel tank

Extreme care should be taken when designing and installing the fuel system. Fuel lines should have few connections as far as possible and it should be kept away from hot engine or exhaust components. The fuel tanks should be in a level with or below the set to prevent siphoning in the event of a line failure. If the set is higher level than the tank, an auxiliary fuel pump may be required.

Testing the generator

We are self sufficient to test all our generators supplied with the best capability.  i.e. we have Resistive / Reactive Load Banks facility.

Baghdad al Salam is making the commissioning and installation of all Gen-set sizes with the utmost care in detail, using the well trained technical teams and according to high level standard.  Also by using the modern instruments, we shorten the time of installation and thereby achieving high productivity.

We also undertake turnkey projects by providing all the necessary material and accessories needed to finish that particular project.